New Search
<br /> S 7 <br /> ~ ~ <br /> Attachment #7 of Exhibit A <br /> - Administrative Order No. 58-97-07-F <br /> Page 2 of 6 <br /> 2.2 C Iculating the MWMC SDC <br /> The C SDC shall be determined by using the reference data contained in Attachment <br /> 4 of thi Appendix D which describes flow estimation units {FEU) and associated.flow and <br /> strengt impacts of various types of development together with the unit cost of flow, BOD, <br /> and If information for a particular development is not found in Attachment 4, it shall be <br /> formul ted using average data of like or similar development as determined by the City <br /> Engine r. For any development, the MWMC SDC is determined by the following formula: <br /> 1. M Itiply the estimated gallons per day of flow per FEU, estimated pounds per day BOD <br /> pe FEU, and estimated pounds per day SS per FEU by their respective unit cost; <br /> 2. Su these amounts, to derive a total cost per FEU for a specific type of development; <br /> r <br /> 3. M Itiply the total cost per FEU for a development type by the number of FEUs for a <br /> de elopment application. <br /> For mo detailed and specific numerical data on FEU calculations, see Table 5. For formula <br /> illustrati ns, see Figure 5 in this Appendix. <br /> 2. 1 Process Wastewater <br /> Th MWMC SDC for development that discharges process wastewater to the <br /> wa tewater system will be charged on the basis of the strength of that discharge. The <br /> rat s per FEU for land uses listed in Attachment 4 of this Appendix include process <br /> wa tewater charges. For uses not otherwise listed in Attachment 4 that include process <br /> wa tewater, the MWMC SDC will be calculated by combining the charge for unit of <br /> de elopment for general industrial uses, and adding the charge for the process <br /> wa tewater FEU that matches the strength of the proposed discharge. The strength <br /> cla ses shown in Attachment 4 are the same strength classes used by MWMC in the <br /> us r fee system. <br /> 2.2. Regional Wastewater SDCs For All New Development with Annual Average <br /> Dai y Flow Equal to or Greater than 100,000 Gallons, and for Existing Development <br /> Inc easing Flow by or Greater than 100,000 Gallons per Day <br /> Bef re calculating the SDC for any development with an anticipated discharge of <br /> 100 000 gallons or more of sewage per day, the Executive Officer of the MWMC (EO) <br /> sha I examine the developments impact on the twenty year schedule of capital projects. <br /> If o e or more capacity-increasing projects will move into the 5-year CIP as a result of <br /> the evelopment, the EO will establish new unit costs (based on the total costs of the <br /> am nded 5-year CIP) upon which SDCs for all development will be calculated. If the <br /> M C SDC rate is modified, the modified fee will be applied to the development that <br /> cau ed the need for the modification and to all future development. <br /> my 7, 1997 City of Eugene SOC Methodology Page D-7 <br /> <br />