New Search
-- application for aright-of--way cut permit must be made by a representative of the. owner or <br />'_" :,perator of the facility being installed or upon which maintenance is being performed. <br />Persons or companies working under contract to the facility owner or operator are not <br />considered representatives of the facility owner and as such will not be allowed to apply <br />for or be granted aright-of--way cut permit. <br />Unless a special exception is granted, applications for right-of--way cut permits to perform <br />excavations upon improved streets shall not be granted where the pavemerit is less #han <br />five years old. EC 7.295 (2) <br />2.D.2 Plans and Drawings <br />Applications for a permit shall be accompanied by such drawings, surveys or plans as <br />deemed necessary by the City Engineer. EC 7.305 <br />..Generally, the permittee shall be required to supply two sets of complete and accurate <br />plans and/or drawings depicting the proposed facility installation. ,Three copies will be <br />made to allow one each for the Utility Inspector, the office file of the permittee and the <br />permittee's field crew performing the work. <br />n those-cases where the proposed work falls within the area of a current City <br />improvement project (subdivisions, sewer construction, street paving, etc:) four copies will <br />be made of the plans and/or drawings. The fourth set shall be forwarded to the <br />Engineering Division Project Manager assigned to the City- improvement project for <br />ro ect office fle. <br />in the <br />,~, placement p ~ <br />' All plans and/or drawings shall contain a north arrow. The proposed work area shall be <br />referenced. by accurate dimensions to a known intersection center-point, lot corners or to a <br />_ known City manhole if an intersection center-point is not available. The plans, and/or <br />.drawings shill be to scale both vertically and horizontally and designs#e with accurate <br />dimensions the portion of the public way proposed to be used and the work zone within <br />the public way. The work zone shall be considered to include 10 feet at a minimum <br />around the perimeter of the proposed excavation or facility placement and shall include" <br />staging and material storage areas within the public way. The plans shall show accurate <br />locations of curbs, sidewalks and driveways within the. proposed work zone... <br />If the critical root zone of a street tree is located within the proposed work zone, the <br />applicant shall so indicate on the permit application, and the plans shall accurately depict <br />the areas of the work zone which may impact street trees, along with the size and location <br />of each tree within such areas. The critical root zone for trees 3 inches or smaller in <br />caliper shall be an area with a radius of at least 3 feet from the trunk. The critical root <br />zone for trees over 3 inches in caliper shall be an area with a radius of at least eighteen <br />inches from the trunk for every 1 inch of caliper size. <br />If the work zone or portions thereof are outside the public right-of-way but within apublic <br />10 12101 /97 <br />Utility & R/UV Permit Policy <br />