New Search
03/05/2004 FRI 17:00 FAR 541 682 6030 CITY EUGENE PW ENG -~-~-~ VYILDISH CONSTRUCTION <br />,,, section in the plans. The roundabout 16" vertical standard curb and the concrete <br />maintenance refuge strip shall be Mesa Buff color as specified in Section 756. <br />00759.90 GENERAL <br />~ 006/028 <br />(ADD) Measurement and payment for the concrete maintenance refuge strip, will be paid at the <br />unit as indicated in the Bid Schedule under the bid item "CONCRETE 6"". <br />Measurement and payment for the roundabout 16" vertical standard curb, wilt be paid at <br />the unit as indicated in the Bid Schedule under the bid item "STANDARD CONCRETE <br />cuass". <br />00650.02 DEFINITIONS: . <br />(DELETE) From the Special Specifications, the entire section. <br />(ADD) Type A -Liquid, Hot-Laid Thermoplastic shall be used for permanent pavement markings <br /> for legends on this project. <br />00850.42 <br />~- APPLICATION OF PAVEMENT MARKING MATERIALS <br />(DELETE) From the Special Specifications, the entire section. <br />(DELETE) Frorn (a) Type A: Liquid, Hot-Laid Thermoplastic Material, from the second sentence in <br />" <br /> the first paragraph the words "least 3 mm (1/8 inch), but not more than 5 mm (3/16 inch) <br />(ADD) "90 mils" <br />i- <br />(ADD) <br />To (a) Type A: Liquid, Hot Laid Thermoplastic Material, to the end of the first paragraph <br /> the sentence "The actual thickness may vary slightly." <br />(ADD) (e) Type E: Hot Liquid Spray Thermoplastic --Apply the thermoplastic containing <br /> traffic beads to the pavement by spray method, to full width specil'ted. in a single <br /> application. Place the pavement marking at 90 mils in thickness, with a separate <br /> application of traffic beads as top dressing. The actual thickness may vary slightly. <br /> Apply spray thermoplastic markings as shown and according to manufacturer's <br /> specifications. <br />(ADD) Type A or Type E shall be used on this project. <br />00862.00 SCOPE <br />(DELETE) From the Special Specifications, the entire section. <br />00862.42 APPLICATION <br />(ADD) Apply the thermoplastic to the full width specified. Place the striping and markings as <br /> shown and according to the manufacturers specifications. Striping thickness shall be 90 <br /> mils. The actual thickness may vary slightly. <br />(ADD) Method B or Method F shall be used on this project. <br />OA862.42 METHOD F: SPRAY MARKINGS <br />(DELETE) From the Special Specifications, the entire section. <br />(DELFT[=) The third and fourth sentence. <br />Addendum ~1 -Job #3502 <br />Page 5 <br />AGrGrv~n T1~1C IIdAD ~ ~•~~Dh~ DD161T TT~AC ~AAD C C.n~oAl <br />