New Search
Lighting Housing: <br />Consolidated Electrical Distributors <br />411 W. 4'" St. Eugene, OR 97401 <br />Contact Denise 541-683-2474 <br />Lighting Consultant: <br />Greg Hansen <br />Balhizer and Hubbard Engineers <br />100 west 13`s Ave. Eugene, Or 97401 <br />541-686-8478 <br />Fabrication Process: <br />All mild steel components were MIG welded using Excel-Arc 71 <br />Dual Shield welding wire. Fabrication was done in accordance with engineered <br />plans provided by OBEC Consulting Engineers. 920 Country Club Rd, Suite <br />10013 Eugene, Or 97401 <br />Maintenance Recommendations: <br />General cleaning: <br />Gently wash with soft cloth or brush and mild soapy water ever few years, to <br />remove accumulation of road bown dust, moss, bird excrement, etc. Care must be <br />taken not to scratch the paint in the washing process. <br />Graffiti Removal: <br />In the event of graffiti vandalism, Naptha solvent may be used sparingly by <br />rubbing softly with a soft cloth. This should remove only the graffiti. Care must <br />be taken not to rub too hard at the risk of removing the outer layer of base paint. <br />If Naptha does not remove the graffiti, the same procedure can be followed using <br />Xylene. <br />Stainless Steel: <br />The Stainless steel net and hardware should require no maintenance other than <br />standard cleaning with the rest of the sculpture. <br />Note: Stainless Steel is contaminated by mild steel. Avoid any contact of the <br />stainless components of the sculpture with steel. <br />Damage Repair: <br />Deep scratches or dents as a result of vandalism or accident should be referred to <br />the artist for repair. <br />