New Search
Laboratory and Field Testing Costs <br /> Page 3 <br /> Portland Cement Concrete: <br /> Cost Per <br /> Description Of Test Test <br /> Compressive Strength. (T22/TM716 & 719) $16.00 <br /> Beam breaks, (T22) $27.00 <br /> Mix Design. (TM718) $1,689.00 <br /> Cement Treated Base, CTB Design (TM126) $790.00 <br /> Mortar Cubes Compressive Strength {6ea.} (T106/TM701) $16.00 <br /> Field Testing And Inspection: <br /> All field Testing and Inspection will be charged by the actual man-hours required to perform the. work. An Average Rate of <br /> $56.12 maybe used for estimating purposes (The actual rate will vary). A minimum of one (1) man-hour should be assumed <br /> for all field work. Vehicle rates apply per hour and vary slightly, averaging $6.45 per hour. <br /> Description of Test <br /> Field Density Testing of Soils, Aggregate and Asphalt Concrete: <br /> Nuclear Gauge (T238 & T239, TM160, TM310C), Sand Cone (T191). <br /> Field Density Control Target Strip (TM306C). <br /> Coring of Asphalt Pavements, 4" or 6" Dia. and drilling base rock to subgrade elevations. <br /> Field Testing and Inspection of Concrete: QCT, CCT, Casting Cylinders, Slump, Air Content, Unit Weight and Yield <br /> (T121/TM713). <br /> Cement Mortar Cubes Casting (T106). <br /> Deflection Testing, Benkehnan Beam -Requires an 18kip axle truck with driver and two flaggers for traffic control. <br /> <br /> NOTES: <br /> 1 All travel and/or standby time will be charged at current hourly rate for the individual ('s) involved. <br /> 2 <br /> Traffic control is not included in the estimated costs. For estimating purposes use an hourly rate of $61.20 per man-hour. <br /> 3 Please call for an estimate if the test you wish is not shown above. <br /> 4 Test numbers designated by "T" indicate AASHTO test procedures and "TM" indicates ODOT or WAQTC test <br /> procedures. <br /> 5 Any equipment not listed will be charged out at the billable rate to Lane County. <br /> <br />